Posted by SOju DAvE on February 20, 2000 at 21:45:19:
Here's a tip for those of you who do your own painting. For the quickest way to strip your parts to the bare metal go to AutoZone, K-mart, Wal-mart or wherever auto body rapair and paint products are sold and buy a can of Aircraft Remover. This crap is in a light blue can with a white lid. The average cost is 3-4 dollars. Then if you don't have one, buy a drill and a wire wheel attachment.
Shake the can well and spray whatever it is you want to strip. The area that you sparyed will start to bubble and blister. Don't worry this is good. Let it sit for about 15-20 minutes. It doesn't have to be exact. After that get the drill and wire whell and remove the paint.
A word of caution: This shit burns skin, not bad but you can feel it. So if it gets on you, rinse with water or spit and rub. Also, if you have body filler or fiberglass patches beware. It will soften the fillers and patches.
FLYNCH RULZ
soJu dAVe